Table conveyor

Use of the machine

The tape to tapparelle is famous for evacuation of the chips of iron. This machine allows to evacuate the chips produced from lathes and/or machinery for the working of the iron, in comfortable and dynamics way, reducing lessened the effort and the time. Conceived for the working more operating, sights its potentialities of capacity and its stability.

Structure

The machine is made up in robusto a chassis in electrosoldered and painted steel whose weight it weighs on n°12 suitable wheels in order to guarantee the stability of the machine during the operation and mobility during the phase of cleaning. The machine is made up of a tape in steel with porters electrosoldered for evacuation of chips, motorized from a electric motor and one situated reducer series high in extremity of machine. The weight of the tape and of eventual chips of iron unloaded on it are supported for half of situated bearings in extremity of the same one, weighing on of the electrosoldered guides internal of the chassis. For the collection of water in presence with the chips, it comes escort on of bathtubs between connected they, situated in the inferior part of the chassis. All the machine is protect from protection Carter fixed that entirety you have security systems adopted they render the working perfectly sure. The more operating machine has been planned and constructed in order to concur the working.

Characteristics and dimensions

Description U.M. Values Installed power kw 1.1 Width max mm 1260 Length mm 17935 Height max mm 2910 Perimeter of support mm 15700x1260 Weight Kg 3000 Wheels of support n° 12

Certification

The machine is accompanied of autocertificazione, and is in compliance with the following dispositions: Directive 89/392 CEE, modified from the directives 91/368/CEE, 93/44/CEE e 93/68/CEE Directive 89/336 CEE, modified from the directives 92/31/CEE e 93/68/CEE Directive 73/23 CEE, modified from the directives 93/68/CEE and pertinents norms: EN 292-1 / EN 292-2 / EN 60204-1